The output should be adjusted in order to achieve the desired Free Available Chlorine level of 2-4 ppm.
The back/save button will save any changes you have made in the menu and send you back to theprevious menu screen. The select button will scroll through and open any available parameters for editing.
BOOST - Can be used to maximize chlorine output for a short period of time. To activate BOOST, press simultaneously. Boost will end after 24 hours. To turn off BOOST, press LOW - Can be used to minimize chlorine output while activated. To activate LOW, press simultaneously. LOW will stay active indefi nitely. To turn off LOW, press Setting the Chlorine Output Level Factors to consider: If the output level is >90% and tested - number of gallons in the pool water shows insuffi cient chlorine - number of bathers (bather load) residual, you may need to shock the - pollen and dust concentration pool or add Cyanuric Acid (CYA) to - number of hours the pump runs protect against UV degradation. - single or variable speed pump use More pump runtime will result in more - climate and water temperature chlorine in the water. - amount of introduced rain water It may take several adjustments Pools at <15K gallons start at 40%. over several days to fi nd the right Pools at 25K - 30K gallons start at 60%. production rate for your application. If these levels do not result in 2 - 4 PPM chlorine residual, raise the output level.*When connected to an automation system via RS485, full control of the TruClear system is given over to
the automation controller. No functionality will persist at the TruClear UI. In order to control the TruClear
from the UI, the automation system must fi rst be placed into service mode. For details on service mode